yosip1115 (November 30, 1999 at 12:00 am)

hey, ive got a question. i have a honeybee king 2, and ive got the brushless motor, metal head assembly. but this morning when i was flying, it hovered fine for a few seconds, then it started jumping up and down. when i ws charging the battery, it said problem with battery, could this be the problem?

subzzzzzzzero (November 30, 1999 at 12:00 am)

thanks for the comment. glad these videos have helped you understand the 1st princibles of helicopter set-up.

ArmandMajidi78 (November 30, 1999 at 12:00 am)

Hi subzz, great video. Im newbie in RC Heli, and just bought HBK2 for my first Heli.. very helpful.. Thanks

subzzzzzzzero (November 30, 1999 at 12:00 am)

you have to get the helicopter ballanced as best you can. this is important. then test hover it. if still going left and backward, ajust the aileron and elevator to ajust the swashplate to compensate for the drifting. it will not effect the pitch or tracking.

Rob3356 (November 30, 1999 at 12:00 am)

Hi Sub Once again thanks for all your help. have done every thing you said in past,pitch perfect, tracking perfect futaba Gy holds perfect. Only thing now im looking at is when i start to lift off the heli wants to move backwards,and left, trimming right up doesnt seem to help, bat is right forward, balance still not good, maybe some weight in canopy will help this. If I adjust the right aileron servo will this throw the pitch out? any suggestions other than trimming ?

777ange777 (November 30, 1999 at 12:00 am)

hey subs, i got the motor to fit, thanks for that. the only prob i have now is that sometimes when i got to raise the throttle, the motor seems to stutter (if that makes sense) it jolts, its not a smooth power up. i have the 25a speed controller, new batteries in the transmitter, and a 2200ma lipo battery. what do you think it could be?? help!! apart from that when its going, its flys great, much better response, just concerned about the motor on startup.

777ange777 (November 30, 1999 at 12:00 am)

well not really as im still trying to hover with it. im new to all this heli stuffm but im getting there!!. they still seem ok (the batteries) but from now on il just charge them up to 90 min.

777ange777 (November 30, 1999 at 12:00 am)

oh great, thanks for the tip, and also about the motor, the only reason for the motor is that the wiring loom coming out of it hits the frame and i didnt look properly if the holes do match up. i will check it out when i get outa work and i will let you know. also where could i get a multi celled bat charger?.

subzzzzzzzero (November 30, 1999 at 12:00 am)

if a ballanced multi-cell charger was not used, it could well have damaged to li-po battery. over charging lipo`s is very bad. could explode, and there will be 3 explosion as each cell catches fire.

stashman123456 (November 30, 1999 at 12:00 am)

wow 7 hours !! did you get a good flight?